GRANITIUM® increases your cutting speed on hard granite.
GRANITIUM® is a range of steel grit dedicated to granite cutting. A special heat treatment allows GRANITIUM® increase its lifecycle and its performance. Result: less consumption and more slabs in a shorter time.
USERS BENEFITS
#1 Efficiency : Greater profitability along the entire cutting chain
- Increased cutting speed
- Steel grit consumption reduced by at least 10%
- Lower cost of cutting operation per sqm.Granite block use ratio (m2/m3) at 2 cm : + 3%
#2 Quality : better-quality granite slabs
- Remarkable regularity between batches, that helps to get a linear quality
- Consistency and stability improved during the cutting operations
PRODUCT CHARACTERISTICS
Finer screen size presents the usual advantages of this distribution: higher m2/m3, lower roughness and blade wear.
GRANITIUM® Technical datasheet |
|||
Product name |
GU 18 |
GU 25 |
GU 35 |
Nominal size (Sieve #) |
1,0 mm (#18) |
0,85 mm (#20) |
0,71 mm (#25) |
Hardness |
> 760 HV |
||
Granite tester |
< 0,24 gt/mm |
||
Density |
7,6 mini |
||
Chemical composition |
C≥0.85% _ Si≥0.4% _ 0.6%≤Mn≤1.2% _ S≤0.05% _ P≤0.05% |
||
General shape |
Angular |
||
Product Illustration |
|
MAIN REFERENCES
- Granitium allows a third cutting operation to be performed with the same blade at IGM.
- Granitium used with the hardest materials improves down speed by 10% at Madhucon factory.