Ready-to-use operating mix for surface preparation in air-blasting

PROFILIUM® is very hard steel grit, developed specially for air blasting applications. As the grain size distribution of the new product is that of a ready-to-use operating mix, the frequency and quantity of abrasive additions will have little or no effect on the profile result: a constant surface profile is obtained. In terms of efficiency, PROFILIUM® has no rival on the market. 
 

 

USERS BENEFITS 

 

#1 Quality : Unique consistency of the surface profile

  • Surface cleanliness improved and achieved more quickly.
  • More consistent and homogeneous surface profile ensuring improved adhesion of coating.

 

#2 Performance : 20% more productivity in comparison with traditional abrasives

  • High performance, low consumption, and reduced wear of blasting equipment.
  • Optimum roughness, providing improved adhesion of coating and reduced paint consumption.

#3 Working conditions : improved working conditions for the operator

  • Less dust and greater visibility.
  • Less environmental impact.

 

PRODUCT CHARACTERISTICS 


Finer screen size presents the usual advantages of this distribution: higher m2/m3, lower roughness and blade wear.


PROFILIUM® Technical datasheet

Product name

PR 23

PR 45

PR 58

Nominal size (Sieve #)

0,71 mm 

(#25)

0,42 mm 

(#40)

0,30 mm 

(#50)

Hardness

> 64 HRc

Density

7,6 mini

Chemical composition

C≥0.85% _ Si≥0.4% _ 0.6%≤Mn≤1.2% _ S≤0.05% _ P≤0.05%

General shape

Angular

Product Illustration

 


Download the brochure

MAIN REFERENCES

 
 

        

And also Daewoo Shipbuilding & Marine Engineering, SungDong Shipbuilding, Industry, Universal Shipbuilding, Dubai Dry Docks.

DOWNLOAD THE SUCCESS STORY

A leader in ship construction had difficulties with the removal of rust from sharp corners. 
This customer achieved +35% to + 45% efficiency (in blasted m²/hr) for same cleanliness level of Sa2.5 by using Profilium.
 

 

CONTACT US FOR FURTHER INFORMATION ON PROFILIUM®